Decolorization and phytotoxicity reduction of reactive blue 40 dye in real textile wastewater by active consortium: Anaerobic/aerobic algal-bacterial-probiotic bioreactor.

The textile dyeing and printing industries has led to extensive environmental pollution and severely threatens ecosystems. The best microbial species for such application was selected among the isolated bacterial populations by conducting CI Reactive Blue 40 (CI RB 40) batch degradation studies with the bacterial-algal-probiotic strains. In this study, three suitable species (Pseudomonas putida, Chlorella and Lactobacillus plantarum) were applied to degrade and detoxify CI RB 40, a reactive diazo dye in Real Textile Wastewater, used in textile dyeing industry worldwide. Process parameters were optimized using Response Surface Methodology and under the optimum conditions (e.g., inoculum size of 10%), temperature of 35 °C, 150 ppm, and time of 6 days). The maximum COD and color removal efficiencies, when tested with 1000 ppm of dye using batch reactors were found to be 89% and 99%, respectively. Our results showed also that bacteria had a high decolorization capacity. The regression analysis revealed a good match of the experimental data to the second-order polynomial with a high coefficient of determination (R2). UV-Visible and FTIR spectroscopy analysis confirmed the biodegradation of CI RB 40. Finally, toxicity of CIRB 40 before and after biodegradation was studied and the detoxification of CIRB 40 dye solution after biodegradation process was confirmed.

Polydopamine-modified interface improves the immobilization of natural bioactive-dye onto textile and enhances antifungal activity.

Dermatomycosis, such as candidiasis and mycosis among others, has emerged recently as the most frequent fungal infection worldwide. This disease is due to the skin's exposure to microorganisms that are able to pass through skin barrier defects. Therefore, textiles in direct contact with skin can serve as a source of contamination and fungus spread. In the current study, a sustainable and eco-friendly method for antifungal cotton finishing using Curcuma longa L extracted from rhizomes was investigated. To enhance the natural bioactive dye uptake and attachment, cellulosic cotton fibers were chemically modified using dopamine, a biocompatible molecule, leading to the deposition of a hydrophilic layer of polydopamine. The efficiency of the polydopamine coating on the cotton surface has been assessed by x-ray photoemission spectroscopy analyses, with the detection of nitrogen, and by water contact angle for the wettability enhancement. Furthermore, characterization of the modified samples confirms that the modification did not affect either the cellulosic fiber morphology or the mechanical properties. The dyeability and bioactive dye immobilization were then assessed by colorimetry. Finally, the effectiveness of the finished fabrics against Trichophyton (rubrum/mentagrophytes) and Candida albicans strains was evaluated and was shown to induce growth inhibition mainly on Candida albicans strains.

Dry and wet ozonation of denim: Degradation products, reaction mechanism, toxicity and cytotoxicity assessment.

The study aims to identify the denim ozonation by-products under different operating conditions and investigate the chemical toxicity of these compounds via the inhibitory effect of the sample on the light emission of bioluminescent bacteria (Vibriofischeri) and on human health using the HepG2 human hepatoma cell line. Various by-products in treated denim extract were detected w gas chromatography-mass spectrometry (GC-MS) analysis. The results revealed that the main oxidation by-product was isatin (1H-indole-2,3-dione), which formed in excess amounts on wet ozonated denim. It was observed that this compound showed more toxicity when high ozone concentrations were used, especially in the presence of moisture. It exhibited a considerable antibacterial activity. EC20 and EC50 average values of 5.55% and 13.47% were obtained with a wet ozonation rinse bath at 48 g/N·m3, which makes it hazardous to aquatic environments.

Antifouling processes and toxicity effects of antifouling paints on marine environment. A review.

The production infrastructure in aquaculture invariably is a complex assortment of submerged components with cages, nets, floats and ropes. Cages are generally made from polyamide or high density polyethylene (PEHD). All of these structures serve as surfaces for biofouling. However, cage nets and supporting infrastructure offer fouling organisms thousands of square meters of multifilament netting. That's why, before immersing them in seawater, they should be coated with an antifouling agent. It helps to prevent net occlusion and to increase its lifespan. Biofouling in marine aquaculture is a specific problem and has three main negative effects. It causes net occlusion and so restricts water and oxygen exchange. Besides, the low dissolved oxygen levels from poor water exchange increases the stress levels of fish, lowers immunity and increases vulnerability to disease. Also, the extra weight imposed by fouling causes cage deformation and structural fatigue. The maintenance and loss of equipment cause the increase of production costs for the industry. Biocides are chemical substances that can prohibit or kill microorganisms responsible for biofouling. The expansion of the aquaculture industry requires the use of more drugs, disinfectants and antifoulant compounds (biocides) to eliminate the microorganisms in the aquaculture facilities. Unfortunately, the use of biocides in the aquatic environment has proved to be harmful as it has toxic effects on the marine environment. The most commonly used biocides in antifouling paints are Tributyltin (TBT), Chlorothalonil, Dichlofluanid, Sea-Nine 211, Diuron, Irgarol 1051 and Zinc Pyrithione. Restrictions were imposed on the use of TBT, that's why organic booster biocides were recently introduced. The replacement products are generally based on copper metal oxides and organic biocides. This paper provides an overview of the effects of antifouling biocides on aquatic organisms. It will focus on the eight booster biocides in common use, despite little data are available for some of them. Toxicity values and effects of these antifoulants will also be mentioned for different species of fish, crustaceans, invertebrates and algae.

Enhancing the functionality of cotton fabric by physical and chemical pre-treatments: A comparative study.

Recently, antimicrobial and decontaminating textiles, such as cotton a natural carbohydrate polymer, are generating more attention. Plant materials used for natural dyes are expected to impart biofunctional properties and high added valued functional textiles. In the current study, surface modification of cotton to maximize the dye amount on the surface has been investigated. Physical modification using nitrogen-hydrogen plasma, chemical modification using chitosan and chemical modification using dopamine as biopolymers imparting amino groups were explored. Furthermore, dye exhaustion of curcumin, as a natural functional dye has been studied. Dye stability tests were also performed after fabric washing using hospital washing protocol to predict the durability of the functionalizations. The results demonstrated that cotton surfaces treated with dopamine exhibit a high level of dye uptake (78%) and a good washing fastness. The use of non-toxic and natural additives during cotton finishing process could give the opportunity of cradle to cradle design for antimicrobial textile industries.

Acclimated biomass that degrades Sulfonated Naphthalene Formaldehyde Condensate.

A number of aerobic species were isolated from textile industry activated sludge wastewater. The bacterial consortium was acclimated during seven days before testing its capacity of Sulfonated Naphthalene-Formaldehyde Condensate (SNFC) recalcitrant compound degradation. SNFC's degradation was evaluated by using different techniques including: vapour pressure osmometry, spectroscopy UV-Visible and Chemical Oxygen Demand (COD). The degradation of SNFC by acclimated bacterial consortium was determined by monitoring the decrease of absorbance and of COD at wavelength 288 nm. We were able to deduce that biodegradation of SNFC involves two steps: cleavage of CH2 bridges and the degradation of the aromatic nuclei. The bacteria species community that was able to degrade SNFC consisted of aerobic Gram-negative rods belonging to the Pseudomonadaceae family. The strains were identified as Bukholderia cepacia, Brevundimonas vesicularis, Pseudomonas stutzeri, Ralostonia picketti, Shewanella putrefaciens, Sphingomonas paucimobilis and Agrobacterium radiobacter.